Comparison
ELEGOO Standard Photopolymer Resin vs Siraya Tech Fast ABS-Like Resin: Which Is Better in 2026?
| At a glance | ELEGOO Standard Photopolymer Resin | Siraya Tech Fast ABS-Like Resin |
|---|---|---|
| Rating | ★★★★⯨ 4.5/5 | ★★★★⯨ 4.7/5 |
| Price | $20-30 / kg | $30-40 / kg |
| Best for | Display models, minis, and anyone learning resin on a budget. | Functional resin parts and minis that need to survive handling. |
| Guarantee | Amazon return policy applies | Amazon return policy applies |
| Check Today's Price → | Check Today's Price → |
Both of these bottles pour into the same vat, print on the same machines, and demand the same gloves, wash, and cure routine. The decision is really about one thing: what happens to the print after it leaves the build plate. If it sits on a shelf, ELEGOO's standard resin at $20-30 per kilogram is the obvious answer. If anyone is going to pick it up, snap it together, or drop it, Siraya Tech Fast at $30-40 per kilogram earns the extra ten dollars.
That's the whole comparison in two sentences. The rest is understanding why, so you don't learn it by sweeping up pieces.
The real difference is what breaks
Standard photopolymer resin cures hard and brittle. That hardness is exactly why it holds detail so well — crisp edges, clean faces on minis, sharp surface texture — and exactly why a thin sword blade or a dropped model shatters instead of flexing. ELEGOO's standard resin is the definitive version of that trade: cheap, stocked everywhere, sold in a pile of colors, and tuned for the fast exposure times of modern mono LCD printers. Its 4.5 rating reflects what it is — the dependable default, not a specialty product.
ABS-like resins cure with some give instead. Siraya Tech Fast is the best-known of them, and its 4.7 rating is earned: prints bend a little before they break, survive real handling, and the resin runs noticeably lower-odor than basic formulas — worth actual money if your printer lives anywhere near where you do. The cost is a slight softening of the very finest detail. On a tabletop mini viewed at arm's length, most people can't tell. On a competition display piece, you might. It also behaves consistently across printer brands, which matters more than the spec sheet suggests when you're dialing in exposure settings.
The picks
ELEGOO Standard Photopolymer Resin
The dependable, affordable default resin for crisp display models.
$20-30 / kg · Amazon return policy applies
Siraya Tech Fast ABS-Like Resin
Tough, low-odor resin that survives a drop better than brittle standard resin.
$30-40 / kg · Amazon return policy applies
How to actually choose
Ask what the print's life looks like after curing. Shelf models, terrain, busts, painting projects: ELEGOO, no hesitation. The money you save per kilogram compounds fast, because resin is a consumable and you will go through liters of it. That math matters double if you're still learning — failed prints hurt less at $25 a bottle, and beginners fail plenty.
Gaming minis that travel in a foam case, snap-fit parts, clips, anything a kid will touch: Siraya. Standard resin's brittleness isn't a minor footnote here. Thin features on handled prints don't survive it, and no amount of careful supports fixes chemistry.
Two honest warnings. First, don't buy the tougher resin expecting an engineering material — ABS-like means "doesn't shatter like glass," not "load-bearing." If you need parts that take real stress or heat, that's a different product category entirely. Second, lower odor is not no odor, and it's definitely not safe fumes. Both resins need gloves and ventilation, every session, no exceptions. Skip resin printing altogether if you can't provide that.
Bottom line
These aren't rivals so much as two answers to different questions. ELEGOO Standard is the right default for display work and for anyone still climbing the learning curve — cheapest way to get sharp results, as long as nobody touches them. Siraya Tech Fast is what you pour when the print has a job that involves human hands. Plenty of people keep both on the shelf and choose per print, which is honestly the correct end state. If you're only buying one bottle and your prints get handled at all, spend the extra ten dollars.