Comparison
Anycubic Wash & Cure Station vs Print Removal Spatula & Scraper Set: Which Should You Buy? (2026)
| At a glance | Anycubic Wash & Cure Station | Print Removal Spatula & Scraper Set |
|---|---|---|
| Rating | ★★★★⯨ 4.6/5 | ★★★★⯨ 4.5/5 |
| Price | $70-110 | $8-15 |
| Best for | Anyone with a resin printer — buy it at the same time. | Anyone prying prints off a stubborn bed. |
| Guarantee | Amazon return policy applies | Amazon return policy applies |
| Check Today's Price → | Check Today's Price → |
Let's be straight about this matchup before you spend anything: these two aren't really competitors. The Anycubic Wash & Cure Station is a post-processing appliance for resin printers, and it does exactly nothing for a filament machine. The spatula and scraper set is a hand tool for getting stuck prints off a build plate, and it's useful on nearly any printer. So the real question isn't which one is better — it's which printer you own and which part of your routine is currently the annoying part.
They also live in completely different price brackets. The station runs $70–110; the scraper set is $8–15. One is an equipment decision. The other is an impulse buy you'll stop thinking about the moment it arrives.
The two products
Anycubic Wash & Cure Station
If you print resin, this is not optional — it automates wash and UV cure.
$70-110 · Amazon return policy applies
Resin prints come off the plate soft, wet, and coated in uncured resin. They need an alcohol wash and then a UV cure before they reach full strength, and doing that by hand means tubs of IPA, gloves, and parts that cure unevenly because one side faced the light. A combined station automates both steps, and it's far cleaner and more consistent than the manual version. Buyers agree — it holds a 4.6 rating. The honest caveats: it only matters if you print resin, it claims permanent bench space, and sizing matters, so confirm it fits prints from your specific machine before ordering. It handles most Mars/Photon-class prints.
Print Removal Spatula & Scraper Set
Safely lifts stubborn prints off the bed without gouging.
$8-15 · Amazon return policy applies
This is the unglamorous bench staple. Even with a flex plate, some prints cling — large flat bases especially — and a thin, sharp spatula slides under a stuck part without gouging the surface, while the stiffer scraper clears purge blobs and debris. At 4.5 stars for under fifteen bucks, there's not much to argue with. The cons are real but manageable: careless technique can scratch a bed, the flimsier sets flex when you need stiffness, and the edges are genuinely sharp. Keep the angle low and never push toward your other hand.
How to actually decide
Own a resin printer? Buy the wash and cure station, ideally the same day you buy the printer. It's not an upgrade, it's a missing half of the workflow. The alternative — swishing parts in pickle containers of alcohol and sun-curing on a windowsill — technically works, but it's messy, inconsistent, and puts your skin near uncured resin far more often than it should.
Filament-only? The station is a paperweight for you. The scraper set is the buy, and at this price the decision barely deserves the word.
Run both kinds of printers? Get both. They don't overlap at all, and the combined cost is still mostly just the station.
Who should skip what
Skip the station if you don't print resin — no exceptions, no "someday" purchases for a printer you don't own yet. Bench space is worth a thought too; it's a second appliance sitting next to the first one.
Skip the scraper set only if your current removal routine already works every time and you never deal with stuck parts or purge mess. Most people don't stay in that category long.
Bottom line
This isn't a versus so much as a category accident — two tools that share a shelf, not a job. Resin owners: the wash and cure station is the priority, and you might as well drop the scraper set in the cart while you're there. Filament owners: take the scraper set, keep your seventy bucks, and put it toward something your printer can actually use.