Comparison
3Doodler Create+ vs MYNT3D Professional 3D Pen: Which Is Better in 2026?
| At a glance | 3Doodler Create+ | MYNT3D Professional 3D Pen |
|---|---|---|
| Rating | ★★★★★ 4.3/5 | ★★★★★ 4.2/5 |
| Price | $70-100 | $50-70 |
| Best for | Crafters, gifts, and quick repairs of failed prints. | Budget-minded tinkerers who want to use their own filament. |
| Guarantee | Amazon return policy applies | Amazon return policy applies |
| Check Today's Price → | Check Today's Price → |
These two pens are separated by one decision that matters more than any spec sheet: what goes in the back of them. The 3Doodler Create+ runs on 3Doodler's own proprietary plastic strands, which you buy from 3Doodler, at 3Doodler's prices. The MYNT3D Professional feeds on standard 1.75mm filament — the same spools you already own if there's a printer on your desk. Nearly everything else about this comparison flows downstream from that.
The rest of the gap is polish versus control. The Create+ ($70–100, rated 4.3) is the more refined tool: comfortable, smooth and predictable extrusion, and a big accessory and refill ecosystem behind it. The MYNT3D ($50–70, rated 4.2) is rougher around the edges but hands you adjustable temperature and speed, which the tinkering crowd actually uses.
The picks
3Doodler Create+
The most refined 3D pen for freehand creating and quick print repairs.
$70-100 · Amazon return policy applies
The Create+ is the pen you hand to someone. Extrusion is smooth and consistent, which matters more than it sounds — a pen that surges and stutters makes freehand work miserable, and beginners quit over it. The refill and accessory ecosystem means colors and add-ons are easy to find. The catch is that proprietary strand: you're locked into 3Doodler's plastic, so the ongoing cost of refills is their decision, not yours.
MYNT3D Professional 3D Pen
A budget 3D pen with adjustable temperature and standard 1.75mm filament.
$50-70 · Amazon return policy applies
The MYNT3D is the pen you buy for yourself. Standard 1.75mm filament means every partial spool of PLA in your closet is now pen fuel, and spooled filament runs far cheaper per gram than proprietary strands. Adjustable temperature and speed let you match the pen to the material instead of hoping a preset is close. It's less polished than the premium pens, and it will clog if you neglect it — filament left to cook in a hot nozzle between sessions is the usual culprit.
How to actually choose
Buy the Create+ if the pen is a gift, the primary user is a kid, or you don't own a 3D printer. In those cases the refill lock-in barely matters — a pen used one craft weekend a month burns through very little plastic, and the smoother, more forgiving experience is worth more than cheap refills nobody ends up buying. It's still a hot-tipped tool, though, so young kids need an adult in the room regardless.
Buy the MYNT3D if you already run a printer. Feeding it your own filament isn't just cheaper; it means your repairs match your prints — same material, same color — when you're welding a cracked bracket or fusing two halves of a large model back together. That's the single best real-world use for a 3D pen, and it's exactly where the MYNT3D's temperature control earns its keep.
Who shouldn't buy either
Anyone expecting precision. A 3D pen is a freehand tool — it produces organic, sketchy, hand-drawn plastic, not dimensionally accurate parts. If accurate parts are the goal, this money is better saved toward a printer. And if you want a craft toy with zero burn risk for small children, neither pen qualifies; both tips get genuinely hot.
Bottom line
These two are closer in quality than the price gap suggests — 4.3 versus 4.2 is a rounding error, and both handle crafts and print repairs well. So decide by filament, not by stars. Printer owners and tinkerers: get the MYNT3D and pocket the difference. Gift buyers, parents, and anyone who wants the smoothest first experience with the least fiddling: pay the extra for the Create+ and don't second-guess it.